ExcelPTZ PTZ605 series Bedienerhandbuch PDF herunterladen (Seite 56)

Connecting the Output Alarm

In addition to the alarm inputs, this dome will activate an alarm output if an alarm input is

triggered. There are two connections for the alarm output, a common and either a normally open

or a normally closed connection. Again this is a 0 volt switch and could be used for example to

close a circuit to an audible alarm, lighting or other warning devices. Ensure that the switch line

does not carry any voltage. Again this switch remains activated until the input alarm/s have been

cleared/reset.

Technical data table

Power Supply 24V AC 1.7A 50/60Hz

Power Consumption Indoors without heater: 15W Outdoors with heater: 35W

Synchronisation Internal / External

Preset positions 128

No. of Tours / Patrols 6

Pattern record time 200 seconds

Alarms 4 x Input Alarms 1 x Output Alarm

Privacy zone masking 6 (only applies to cameras with this functionality)

Zoom rotation interaction The dome will automatically adjust manual control speed

Auto overturning The camera rotates 180° when vertical position reached

Pan scanning 360° programmable

Pan speed 0° ~ 300° per second

Pan range 360° continuously

Tilt range 0° ~ 90°

Tilt speed 0° ~ 120° per second

Communication RS485

Baud Rate 2400/4800/9600/19200

Fan / Heater Auto (outdoor use only)

Relative humidity 10 ~ 75%

Working Temperature Indoor: 0°C ~ +40°C Outdoor -35°C ~ +55°C

Technical Specification

1 2 ... 51 52 53 54 55 56 57 58

Keine Kommentare

ExcelPTZ PTZ605 series Bedienerhandbuch Seite 56