ExcelPTZ PTZ605 series Bedienerhandbuch PDF herunterladen (Seite 45)

Controlling one camera then another.

If you look at the image of the LCD display you can see the CAM=001

indicates that the keyboard is ready to talk to camera with address 1. In the

dome the address 1 is set as default in the factory. You need to alter the DIP-

switches within the domes to address 2, 3 etc if you have multiple domes on the same site, refer to

the previous instructions how to set the DIP Switches. If you have another dome set at camera

address 2, press CAM followed by 2. This would change the screen to CAM=002. And so on.

Note that it is possible on this dome to change the dome address remotely using the dome menu.

Refer to earlier instructions.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Keine Kommentare

ExcelPTZ PTZ605 series Bedienerhandbuch Seite 45